We all know that there are mainly two types of pyrolysis plant for sale in the market: batching and continuous tyre to oil pyrolysis plant. Clients always feel confused what is the right choice for them as they don’t know too much about the pyrolysis plant. Here Kingtiger Group will give you a detailed comparison between batching and continuous pyrolysis plant which including the following parts.
For this type of pyrolysis plant, you should feed material on one side and remove the carbon continuously by the other side. When the temperature reaches 250-280°, we can get the crude oil and the oil steam will be produced continuous until the temperature reaches 300-400°C. Feed five tons raw material, oil output ends after about five hours. Repeat the above process, and slag will keep coming out for two hours without any labor force. Then you can start over, one day’ work is finished until slag completely come out.
Continuous plant makes use of automatic slag-out system, thus it don’t need any labor force to take out the slag. On the contrary, Batch plant isn’t equipped with automatic slag-out system, therefore, it need to be slagged out by workers. What’s more, the slag-out process is supposed to be started after the furnace cooled down completely. The equipment doesn’t stop for 24 hours. This is why we call it automatically continuous plant. It is more convenient and sufficient than the batching pyrolysis plant.
By this type of machine, workers should fill the raw material, for example, the waste tyre, plastic with a batch of raw material and take the process, and then after cooling down and removal of the carbon, the next process will happen. Batch pyrolysis plant is able to process 10 tons raw material one day. It needs feeding time for one and a half hour, processing time for eight to nine hours, cooling time for five to six hour, and slagging out time for two hours. In this process, the steel wire should be pulled out by people. It is more traditional, so it is cheap enough for people who haven’t prepared enough fund for this project.
Continuous Tyre And Plastic Waste Pyrolysis Plant From Kingtiger Technology:
Batching Tyre And Plastic Waste Pyrolysis Equipment From Kingtiger Technology:
|size of raw material||1200mm||30-50mm|
|Size of reactor||D2200*L6000mm||D2800*L6200mm||D2800*L7100|
|24 hours capacity||6T||8-10T||16-20T|
|Operation pressure||Normal pressure|
|Fuel||Charcoal, wood, fuel oil, natural gas, LPG, etc.|
|Average rate of oil output||50%（differ according to raw material ingredient and impurity content）|
|Material of reactor||Q245R boiler steel|
|Thickness of reactor plate||16mm( BLJ-6&BLJ-10)||12mm(BLL-16)|
|Rotate speed of reactor||0.4-0.8 turn/minute|
|Cooling method||Water cooling|
|Use lifetime||5-8 years|
|Floor area||BLJ-6 （30*10*10）||BLJ-10（30*10*10）||BLL-16（40*10*10）|
Nowadays, recyling and processing of the “black pollution” namely waste tyre pollution, and “white pollution” namely white plastic pollution is a worldwide problem. People become focus on this big problem, traditional oil refine can keep pace with the development of our society, so one who want to involve in this industry should adopt some advanced technology. The tyre and plastic pyrolysis plant for sale from Kingtiger Group is a suitable choice for you with its high oil output, stable performance and lower cost. Any more questions about these batching and continuous pyrolysis plant, welcome to contact us!